GBP (£) EUR (€) USD ($)

Vacuum Bed UV Exposure Units

by Dalesway Print Technology
> OUT OF STOCK

Wide Range of Applications

Our Xeros range of vacuum bed uv exposure units are very versatile and can be used to produce:

  • Water and Solvent Washable Pad Printing Plates
  • Water Washable Hot Foil Polymer Plates
  • PCB's - Single and Double Sided
  • Glass Engraving Stencils
  • ID-Mark ® Imaging Material
Description
Options
Resources

Easy to use

The digital timer is controlled from a touch membrane and offers exposure times up to 999 seconds. The lid is fitted with a gas strut for easy operation and in the event that someone accidentally opens the unit during an exposure, the lights will immediately switch off as a safety measure.

Once the time has been dialed into the unit, the lid is secured and once the start button is pressed, the unit automatically takes vacuum. The exposure starts as soon as vacuum has been achieved.

Once the exposure is complete, a buzzer will sound and a light will illuminate to show that the exposure is complete. This light remains lit until the lid on the exposure unit is raised to safeguard against accidentally double exposing the material.

What makes these vacuum bed uv exposure units particularly easy to use is the fact that the lights are in the top. The material to be exposed and artwork can therefore be lined up easily rather than in reverse order.

Available Exposure Unit Models

In the majority of cases our smallest unit is all that is required. However, if your application requires a much larger work area, we also offer three larger models. For a complete breakdown of the specification on the different models, please refer to the comparison table in the Resources tab.

Double-Sided UV Exposure Units

If you need to expose products such as PCB's on both sides, these units are also available in double-sided models. Please enquire.

Manufactured in the UK

If a high specification and high quality unit is important, you will be pleased to know our units are manufactured in the UK and rarely do we have any issues apart from customers eventually wearing the lights and rubber blankets on the exposure units out.

Should your unit need a bit of tender loving care after years of hard work, feel free to get in touch with us and we will be pleased to advise you further.

Vacuum Bed UV Exposure Units: Specifications


Xeros 315 Xeros 321 Xeros 360 Xeros 380
Working area 33 x 36 cm 37 x 60 cm 57 x 68 cm 52 x 92 cm
UV output 6 x 15 Watt 6 x 20 Watt 10 x 20 Watt 12 x 20 Watt
Dimensions 55 x 48 x 17 cm 72 x 58 x 17 cm 76 x 73 x 17 cm 89 x 103 x 21 cm
Weight 17 kg 27 kg 34 kg 60 kg
Timer (digital) 999 seconds 999 seconds 999 seconds 999 seconds
Warranty 12 Months 12 Months 12 Months 12 Months

Lead Times

Please note that these units are manufactured to order and the lead time is approximately 3-4 weeks from receipt of purchase order and deposit payment. Please get in touch if you have any specific questions. At different periods during the year, lead times may vary depending on work volume.

Please Note: These units are not suitable for exposing screens. Please review our screen exposure unit page for this application. If your budget is more limited, we also offer a pressure pad uv exposure unit that is ideal if your artwork is not too detailed.

Model

£895.00
exc. VAT

Free delivery on consumable orders over £150

 

Sign up to our Newsletter for all of our latest News, Special Offers, Product Updates and Information.